How To Make Diaper Liners: A Step-By-Step Guide

Diaper liners are absorbent pads inserted into the diaper to absorb fluid and prevent leaks. They come in a variety of shapes and sizes to fit different types of diapers. Some diaper liners are made from cloth, disposable paper, or waterproof fabric. You should change diaper liners every 2-4 hours, depending on the type of diaper and the baby‘s activity level. Diaper liners can also be used as a disposable changing pad if needed.

Did you know that cloth diaper liners can double as diaper covers? We’re in love with cloth diaper liners and diaper covers, and we’re sure you will be, too, once you get the hang of it. You can use these reusable cloth inserts with your favorite diapers to absorb moisture. They’re easy to make and help keep your baby’s skin soft and comfortable. Read on to find out how to make diaper liners to save money and protect your baby’s skin while also getting some great DIY tips.

Types Of Diaper Liners

There are three types of diaper liners that you can make at home: disposable paper, cloth, and waterproof fabric.

Disposable Paper Liner

This type of diaper liner is made from disposable paper. You will need to buy absorbent sheets or toilet-paper-like rolls (either 80gsm or 40gsm) in either white or grey. Once the liners have been cut to size, fold them in half so that you have an 8×8 inch square, and then crease them straight across the middle. Finally, open up the liner so it resembles a sheet of paper and folds it in half again. Make sure the creases are facing outwards to form a pocket for diaper moisture to stay contained.

Cloth Liner

To make cloth liners, you will need absorbent polyester fleece fabric in any color or pattern. Cut the fabric into 16-inch squares and then unfold it so that each square measures 24 inches by 36 inches (60x90cm). Next, lay one piece of fleece diagonally on top of another so that both layers touch without sewing them together. Finally, crease the fabric diagonally so that it forms a pocket. Ensure that the crease is facing outwards, so diaper moisture stays contained.

Waterproof Fabric Liner

This diaper liner is made from waterproof fleece fabric and can be used with cloth or disposable diapers. To make it, you will need 1-2 Polyester batting sheets per square foot (24×36 inches/60x90cm). Cut the batting into 18×24 inch squares and then unfold them, so each square measures 24 inches by 36 inches (60x90cm).

Next, lay one piece of fleece diagonally on top of another so that both layers touch without sewing them together. Finally, crease the fabric diagonally so that it forms a pocket. Ensure that the crease is facing outwards, so diaper moisture stays contained.

4 Steps To Make Diaper Liners

Diaper liners can help keep your baby safe from wetness and discomfort. The absorbency of diaper liners varies, so it’s important to change the liner when it becomes saturated and roiled. Changing the liner frequently can help reduce the risk of diaper rash and irritation. Additionally, using a diapering pail with a liner will ensure that your baby’s diaper remains clean and dry.

1. Cut your diaper liner fabric to size- Fold the diaper liner in half so that you have an 8×8 inch square, then crease it straight across the middle.
2. Open up the diaper liner to resemble a sheet of paper- Next, fold the diaper liner in half again and ensure that all of the creases are facing outwards, forming a pocket for diaper moisture to stay contained.
3. To use your cloth diapers with liners: put on cloth diapers as usual- After putting on disposable underpants or pad over them (optional), attach the diaper liner by placing one corner over the waistband of the disposable diaper and tucking it in. Make sure to fasten it around your waist- Next, fold the bottom third of the diaper liner towards you so that it meets the top two-thirds of the diaper liner. Then Velcro or snap each side together (or simply pull tight). This will secure your cloth diapers inside the waterproof pocket.
4. To use disposable liners with liners: put on disposable diapers as usual- After putting on underpants or a pad over them (optional), attach the liner by placing one corner over the waistband of the disposable diaper and tucking it in.

Choosing A Fabric

Diaper liners are essential for diaper wearers of all ages. They protect the diaper from moisture, absorb urine, and stay in place. There are a variety of fabrics that you can use for diaper liners, including cotton, fleece, rayon, and microfiber. It’s important to choose a material that is absorbent and durable; fabrics that are waterproof or resistant to moisture are desirable.

To create a perfect fit, it is important to match the fabric size to the diaper size (usually in inches). Whether cloth-diapering your baby or cloth-dying your cloth diapers, diaper liners are essential to any diaper-wearing routine.

What Size To Make Them

To make diaper liners, you will need a cloth measuring 20 inches by 18 inches. You can use any type of cloth to make diaper liners, but cotton is the most absorbent and easy to work with. To create a diaper liner, you will want to cut the cloth into a rectangle measuring 20 inches by 18 inches. The next step is to place the cloth on a flat surface and mark three lines along the edge of the cloth.

Next, you will want to snip the fabric along the marked lines to create 12-inch-by-18-inch strips. This will allow you to easily create diaper liners from one piece of cloth. Once you have your strips, all left to do is glue one end of each strip to the inside edge of one diaper cover for a quick and easy diaper liner project.

How To Use Them

Diaper liners are a great way to reduce waste when changing diapers. You can also use them to protect furniture from baby spills. To make diaper liners, you will need cloth diapers, diaper liner fabric, and a sewing machine. First, cut the diaper liner fabric into a size that will fit the entire diaper.

Then sew the fabric around the edge of the diaper, making sure to leave a 1-inch opening at the front and back of the diaper. Next, turn the diaper inside out and press the edges of the fabric together. Pin or sew the closure in place. Finally, wash and dry your diaper liner, and you’re ready to use it the next time you change a diaper.

Tips For Making Perfect Diaper Liners

Choose the right type of diaper liner. There are different types of diaper liners on the market, so it’s important to research and find the one that best suits your needs and preferences. You can choose between reusable cloth diapers and disposable diaper liners.

-Pre-washing the fabric: Before sewing, it’s important to pre-wash the diaper liner fabric to remove any lingering residue from previous diaper use. This will prevent any stains from transferring to the diaper liner fabric. Additionally, washing the fabric will help it become more absorbent and reduce the chances of it becoming too hot and uncomfortable for the baby.

-Sewing the liner: When sewing a diaper liner, you must be careful not to stretch out or distort the fabric too much. Sewing straight lines will help ensure that the edges of the diaper liner stay consistent and smooth throughout its life.

-Trimming excess fabric: When sewing a diaper liner, it’s important to leave enough room around the diaper for the baby to easily access it. That’s why you need to trim any excess fabric after sewing is complete to avoid having cloth hanging over the baby’s legs or getting tangled in their clothes while they’re wearing the diaper liner.

-Finishing touches: After sewing a diaper liner, you should iron it properly to help ensure that it is soft and comfortable for the baby. By following these tips, you can make a perfect diaper liner.

How To Make Diy Cloth Diaper Inserts Tutorial

Cloth diaper inserts are a great way to keep your diapers leak-free and comfortable. They’re also more environmentally friendly than disposable diapers since you can’t throw them away like paper diapers. To make DIY cloth diaper inserts, you’ll need some supplies:

Determine Cloth Diaper Insert Sizes

To ensure that your cloth diaper inserts fit correctly, you’ll first need to estimate the size of diaper your baby will be using. You can do this by following these simple steps:

-Fill out a disposable diaper diapering measurements chart and ensure to include any protruding body parts such as an overhang around hips or thighs. This info will help you determine what size cloth diaper insert your baby needs.

-If you’re planning on making multiple types of inserts (diapers, coverage, etc.), it’s important to keep all of the sizing information in one place so that you can make the correct cloth diaper inserts without having to measure again.

-Once you have your estimated diaper size, you can begin measuring clothes in different sizes and using that info to create your sizing chart for cloth diaper inserts. This will be much easier than trying to convert measurements from disposable diapers.

Wash And Dry

Washing and drying your diapers properly is essential to keeping them in good condition. After washing, diaper rinse, and hanging to dry, it’s time to sew them into reusable diaper inserts. This tutorial will show you how to make a set of disposable inserts that you can use with any type of diaper. Whether making cloth diaper inserts or disposable diapers, follow these steps to ensure they stay in good condition and are absorbent over time. The key is to wash and dry your diapers thoroughly and regularly.

Cut Out Fabric

Diaper liners are a necessary part of cloth diapering and should replace as often as needed. They absorb moisture and waste from diapers, making it easier to stay clean and dry. However, diaper liners only work well when they are changed frequently and replaced with new ones. Making diaper inserts is a great way to save money while ensuring that your baby stays comfortable and dry.

You can easily make DIY diaper inserts by cutting the fabric to the size you need and folding it in half. Then, place the folded fabric inside the diaper and pin it in place. Finally, sew the fabric’s edge to the diaper’s edge. This step-by-step tutorial will show you how to make diy cloth diaper inserts for your baby’s diaper stash.

Sewing Cloth Diaper Inserts With A Serger:

If you want to sew your cloth diaper inserts, a serger would be a great tool. Sergers are versatile machines you can use to sew various materials, including cloth diaper inserts. Sewing cloth diaper inserts with a serger is a quick and easy process that can save you time and money. Instead of buying diaper inserts from the store, you can make your own at home.

You only need a few simple supplies: cloth diaper fabric or fleece, an absorbent core (such as microfiber or fleece), and Velcro or snaps to fasten the diaper insert in place. You need to follow detailed instructions, and you’ll be ready to start diapering your baby in no time.

Sewing Cloth Diaper Inserts With A Standard Sewing Machine:

Diaper inserts can be made from various materials, including cotton, fleece, and bamboo. You can customize them to fit your baby’s needs, such as absorbency and moisture-keeping properties. Sewing cloth diaper inserts is a simple process that you can complete in just a few minutes.

All you need are basic sewing supplies, including thread, pins, and a zipper foot. Using this tutorial, you can make your own cloth diaper inserts to stay diaper-fied during the day! By making your diaper inserts, you can ensure they are safe and absorbent for your baby. Besides, they will be more cost-effective than buying disposable diapers.

Conclusion

Diaper liners are a great way to protect your baby’s bottom from soiled diapers and absorb more moisture while they’re in the diaper. Besides, they help keep your baby’s nursery or first-floor bathroom smelling fresh, tidy, and comfortable. However, choosing the right diaper liner for them can be overwhelming. So, we’ve created a step-by-step tutorial showing you how to easily make cloth diaper inserts. It also explains the sizing of cloth diaper inserts and washing and drying tips.

Frequently Asked Questions